The main matters of operation of Roots vacuum pump?
2024-01-10
Summary
Roots vacuum pump has a wide range of applications in the industrial field. Because of its many advantages, it has been recognized by many enterprises, and its quality is reliable, so it is worth our choice. Here today mainly to introduce the operation of the roots vacuum pump under the main matters?
Roots vacuum pumpIn the industrial field, the application range is very wide, because of its many advantages, it is recognized by many enterprises, and the quality is reliable, it is worth our choice. Here today mainly to introduce the operation of the roots vacuum pump under the main matters?
Roots vacuum pump is through a pair of "8" shaped rotor reverse rotation to achieve pumping function. When the rotor and the pump body form a suction cavity, the two rotors are always in a sealed state, so as to ensure that the gas at the exhaust port will not flow back to the intake port, thereby achieving the pumping function. The reverse synchronous rotation of the rotor in use is achieved by a pair of gears mounted on the rotor shaft. Since there is no friction in the Roots vacuum pump, the Roots pump can run at a high speed of 1500 to 3000rpm without lubrication in the pump chamber. In order to keep the Roots vacuum pump running smoothly at high speed during use, the rotor should be well balanced. There is no direct contact between the high-speed rotating rotors and between the rotor and the pump body, and a certain gap is maintained between the moving parts. To avoid problems later. It is recommended that you pay attention to check the location of the oil level. If the requirements are not met, adjustments need to be made to meet the requirements. The oil level should reach the mimeograph center during operation.
Roots vacuum pumpThe oil change cycle is determined by the user according to the actual use and whether the performance requirements can be met. General new Roots vacuum pump, in the suction of clean dry gas, it is recommended to work 100 hours to change the oil. After the black metal powder cannot be seen in the standby oil, the oil change period can be extended. In addition to what we said for you, you should also check the quality of the oil frequently. If the oil quality is found to be deteriorated, the new oil should be replaced in time to ensure the normal operation of the Roots pump. Under normal circumstances, the Roots vacuum pump should be inspected after 2000 hours of operation, check the aging degree of the silicone sealing ring, check whether the exhaust valve is damaged, and clean the dirt on the valve body and exhaust valve seat. Can also be reassembled after the test run, 2 hours after the oil change 2 times. Due to the cleaning of the Roots vacuum pump in order to operate normally, there will be a certain amount of volatiles, and then put into normal operation. If you have something you don't understand, you can call us at any time to consult. You can see the contact information when you enter the official website. You can also consult the online customer service personnel.
The above article content is for all friends about the operationRoots vacuum pumpIf you have any needs in this area, you can check it out and hope it can help you. As the main product of our factory, thanks to the strong support of new and old customers, we not only ensure the reliability of product quality, but also benefit our customers.
Previous:
Contact Us
E-mail:
sanniu888@126.com
Telephone:
400-6531-228/0086-531-83288777
Address:East Industrial Park, Xianggong Sub-district Office, Zhangqiu District, Jinan City, Shandong Province