Roots blower price: Roots blower hot causes and solutions
2021-08-04
Summary
Such problems should be solved in time to avoid greater losses! 1. pipes. The pressure of the pipeline is relatively easy to cause the fan temperature is too high factors. Roots blower according to different diameters, the main pipe of the air outlet is fixed number, if the special requirements of the pipe artificial change diameter, it is easy to cause pressure, breeding is often prone to the main pipe thin situation, modify the main pipe diameter to do the corresponding treatment to ensure the normal pressure of the fan.
There are generally two reasons for burning, one is pressure suppression, the other is that the machine is broken or lack of oil!
Such problems should be solved in time to avoid greater losses!
1. pipes. The pressure of the pipeline is relatively easy to cause the fan temperature is too high factors. Roots blower according to different diameters, the main pipe of the air outlet is fixed number, if the special requirements of the pipe artificial change diameter, it is easy to cause pressure, breeding is often prone to the main pipe thin situation, modify the main pipe diameter to do the corresponding treatment to ensure the normal pressure of the fan.
2. work environment. According to the normal design standard, the fan should be operated in the fan pump room, but according to the author's many years of experience, most of the roots fans are operated in the open air environment. The influence of summer factors is more obvious. If conditions permit, refrigeration and cooling equipment can be configured to avoid the influence of environmental factors on the fan, or a soundproof cover equipped with a heat dissipation device can be equipped.
3. the configuration of the fan. The pressure and air volume of the fan are certain, but there are often cases of small horse-drawn carts, that is, small motor with large fan. In order to meet the flow requirements of the fan, it will cause a relatively large load on the motor, thus causing the motor to burn and the fan to burn.
Installation of 4. fans. If the flow pressure is no problem or overloaded or hot when the new fan is used at the beginning, but it starts to burn after a period of time, it means that the fan needs to check the tightness of the belt again and tighten the fixing screws again.
Previous:
Contact Us
E-mail:
sanniu888@126.com
Telephone:
400-6531-228/0086-531-83288777
Address:East Industrial Park, Xianggong Sub-district Office, Zhangqiu District, Jinan City, Shandong Province