2021/08/25

How to debug roots blower?

Because the Roots blower is a high-speed running machine, it will cause vibration. The pulse of the internal air will make the vibration of the Roots blower larger, so it should be fixed on the ground when installing the Roots blower. According to the blower model, dig a 150*150mm square 300mm deep square pit from this position, dig out the bottom bolts, connect the fan with bolts and nuts, and finally fill the square pit with cement concrete. If the concrete is fixed, then Tighten the nut.

2021/08/25

How to debug roots blower?

Because the Roots blower is a high-speed running machine, it will cause vibration. The pulse of the internal air will make the vibration of the Roots blower larger, so it should be fixed on the ground when installing the Roots blower. According to the blower model, dig a 150*150mm square 300mm deep square pit from this position, dig out the bottom bolts, connect the fan with bolts and nuts, and finally fill the square pit with cement concrete. If the concrete is fixed, then Tighten the nut.

2021/08/22

What are the classification of roots blower?

What are the operating conditions of the roots blower? 1. The inlet temperature of the conveyor medium usually cannot exceed 40. The particle content in the medium cannot exceed 100mg/m3, and the maximum size of the particles cannot exceed half of the minimum working interval.

2021/08/19

What is the principle of roots blower?

Roots blower is a volumetric fan, impeller end, blower before and after the end of the seal. The principle is a rotary compressor that uses two vane-type rotors to perform relative movement in the cylinder to compress and transport gas. The blower is simple in structure and convenient to manufacture. It is widely used in aquaculture oxygenation, sewage treatment aeration, cement transportation, and can be used as a gas transportation and pressurization system more suitable for low pressure conditions, vacuum pumps, etc.

2021/08/04

Roots blower price: Roots blower hot causes and solutions

Such problems should be solved in time to avoid greater losses! 1. pipes. The pressure of the pipeline is relatively easy to cause the fan temperature is too high factors. Roots blower according to different diameters, the main pipe of the air outlet is fixed number, if the special requirements of the pipe artificial change diameter, it is easy to cause pressure, breeding is often prone to the main pipe thin situation, modify the main pipe diameter to do the corresponding treatment to ensure the normal pressure of the fan.

2021/08/02

Roots blower price: what are the conditions of use of roots blower?

Because the roots blower is a high-speed running machine, it will produce vibration, and because of the pulsation of its internal air, it also increases the vibration of the roots blower, so the installation of the roots blower needs to be fixed on the ground. Today, introduce the conditions of use of Roots blower:

2021/07/20

Notes on the operation of Roots blower

Operation: After the Roots blower is running normally, the operator should pay close attention to the operating conditions of all parts, and observe the temperature of each part of the machine, the vibration of the machine, and the noise of the muffler at any time. If there is any abnormality, stop immediately.

2021/07/14

How to adjust the air volume of Roots blower?

Roots blower has simple structure and convenient manufacture. It is widely used in aquaculture aeration, sewage treatment aeration, cement transportation. It is more suitable for gas transportation and pressurization systems in low-pressure situations, and can also be used as a vacuum pump. How to adjust the air volume of the roots blower today?

2021/07/06

What if the Roots blower doesn't move?

It is easy to have various problems when the roots blower that has been stagnant for a long time is restarted. The common problem is the situation of locking and not moving. Today, Shandong Sanniu Machinery Group Co., Ltd. will explain to you the reason why the roots blower cannot move according to its own knowledge.

2021/06/15

If the Roots blower needs to be treated immediately after entering the water

If the following items are normal, start and run for more than 30 minutes, start the fan and dry the fan at the operating temperature of the fan. Notes after the Roots blower water: